Aluminium Koporo le Bimetallic mofuta Connectors
Lintlha tsa Tekheniki
| Mohlala | Conductor Cross-section(mm2) Ka 6-50 Al 16-70 | Liboutu |
| CAPG-A1 | Ka 10-95 Al 25-150 | 1×M8×40 |
| CAPG-A2 | Ka 6-50 Al 16-70 | 1×M8×45 |
| CAPG-B1 | Ka 10-95 Al 25-150 | 2×M8×45 |
| CAPG-B2 | Ka 25-185 Al 35-200 | 2×M8×50 |
| CAPG-B3 | Ka 6-50 Al 16-70 | 2×M10×60 |
| CAPG-C1 | Ka 10-95 Al 25-150 | 3×M8×45 |
| CAPG-C2 | Ka 25-185 Al 35-240 | 3×M8×50 |
| CAPG-C3 | Ka 35-240 Al 35-300 | 3×M10×60 |
| CAPG-C4 | 3×M10×70 |
Lintho tse bonahalang
Matla a phahameng a aluminium alloy ka ho forging.Phekolo ea bokaholimo: E khanyang.
Thepa ea lihlahisoa
ALPG e sebelisetsoa ho hokahanya kapa ho kopanya li-conductor tsa AAC, AAAC kapa ACSR tse holimo.Forging e etsa clamp e matla e phahameng.Likoti tse koetsoeng li lumella hore ho lokisoe li-conductor tse fapaneng ka lehlakoreng le leng.Teko ea mofuta oa eona e lumellana le IEC61238-1.
Lintlha tsa Tekheniki
| Mohlala | Conductor Cross-section(mm2) | Liboutu |
| APG-A1 | Lilemo tse 16-70 | 1×M8×40 |
| APG-A2 | Lilemo tse 16-150 | 1×M8×45 |
| APG-B1 | Ka lilemo tse 16-35 | 2×M6×35 |
| APG-B2 | Lilemo tse 16-70 | 2×M8×45 |
| APG-B3 | Lilemo tse 16-150 | 2×M8×50 |
| APG-B4 | Lilemo tse 25-185 | 2×M10×60 |
| APG-C1 | Lilemo tse 16-70 | 3×M8×45 |
| APG-C2 | Lilemo tse 16-150 | 3×M8×50 |
| APG-C3 | Al 25-240 | 3×M10×60 |
| APG-C4 | Ka lilemo tse 35-300 | 3×M10×70 |
Parallel Groove Clamps Copper Extruded mofuta
Clamp e ne e etselitsoe ho hokahanya li-conductor tse peli tse bapileng.Li-conductors li ka ba likhoele tsa koporo kapa lithupa.Lisebelisoa ke koporo e entsoeng bakeng sa khokahanyo ea koporo ho ea ho koporo ho pholletsa le mefuta eohle ea conductor.Li-clamp li na le li-grooves tse pota-potileng bakeng sa ho kopana le li-conductor tse ngata, li sebelisa liboutu tsa koporo 'me li sebelisa li-washer tsa Belleville ho thibela ho futhumala ha mocheso tlas'a meroalo ea cyclic.Li-clamps li koahetsoe ka oxide inhibitor.'Me libotlolo le linate tse nang le li-washer li ne li hlokahala.
Bakeng sa likhokahano tsa li-tap-off tsa copper-conductors acc.ho DIN 48201
Lintho tse bonahalang
'Mele: Alloy ea koporo
Bolts: tšepe kapa tšepe e sa hloekang Linate: DIN 934, Bokaholimo ba tšepe: bo sa koaheloa
| Mohlala | Bolt Torque | Mokhanni oa marang-rang mm2 | Litekanyo mm OD | No./Size of Bolts |
| CU6-70-2 | 20Nm | 6 ho isa ho 70 | 2.7 ho isa ho 10.5 | 2×M8 |
| CU16-95-2 | 20Nm | 16 ho isa ho 95 | 5.1 ho 12.5 | 2×M8 |
| CU16-150-2 | 30Nm | 16 ho isa ho 150 | 5.1 ho 15.7 | 2×M10 |
| CU150-240-2 | 40Nm | 150 ho isa ho 240 | 15.7 ho 20.3 | 2×M12 |
| CU300-400-3 | 40Nm | 300 ho isa ho 400 | 22.6 ho isa ho 26.7 | 3×M12 |
